我的購物車0
購物車中還沒有商品,趕快選購吧!
薄膜电容器–交流电容电机运行电容器系列/类型
發布日期:2018-10-24  瀏覽次數:934  電子元器件型號大全

EPCOSFilm Capacitors – AC Capacitors Motor run capacitors Series/Type: Ordering code: Date: B32355C – MotorCap™ S3 Compact, 100 °C B32355C July 2017 Version: 1  EPCOS AG 2017. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left bar): Film Capacitors – AC Capacitors Identification/Classification 2 (header 2 + bottom left header bar): Motor run capacitors Ordering code: (top right header bar) B32355C Series/Type: (bottom right header bar) B32355C – MotorCap™ S3 Compact, 100 °C Preliminary data (optional): Department: CAP RD FILM PD AC Date: July 2017 Version: 1 Film Capacitors – AC Capacitors B32355C Motor run capacitors B32355C – MotorCap™ S3 Compact, 100 °C CAP RD FILM PD AC July 2017 Please read Cautions and warnings and Page 2 of 6 Important notes at the end of this document. Construction  Metallized polypropylene film  Plastic can with resin top  Dry type resin Features  Self-healing properties  Low dissipation factor  Highest safety level S3 safety class to IEC60252-1 (ed.2) am1:  High insulation resistance  IEC 60335-1 compatible  Higher operating temperature class,100 °C. Applications  For general sine wave applications, mainly as motor run capacitor Terminals  Insulated solid copper wire, 0.5 mm2 ,105°C. Mounting parts (optional)  Plain can Technical data and specifications Reference standards EN60252-1: 2014-07 IEC60252-1: Ed 2,2013-8,amendment 1 Life expectancy to IEC 60252-1 /2013 400 V: 10000 h (class B) Safety class to IEC 60252-1/ 2013 S3 Rated capacitance CR See table ordering codes, page 5 Tolerance 5% Permitted capacitance C/C 3% Rated voltage VR 400 V AC Rated frequency fR 50/60 Hz Maximum ratings Maximum permissible voltage Vmax 1.1 · VR (VR = rated voltage) Maximum permissible current Imax 1.3 IR (IR = rated current) Film Capacitors – AC Capacitors B32355C Motor run capacitors B32355C – MotorCap™ S3 Compact, 100 °C CAP RD FILM PD AC July 2017 Please read Cautions and warnings and Page 3 of 6 Important notes at the end of this document. Test data AC test voltage terminal to terminal UTT AC test voltage terminals to can UTC 2 VR, 2 s (routine test) 2 kV AC, 2 s (routine test) Insulation resistance Rins or time constant  at 20 °C, Rel. humidity max. value 85%, annual means  65% 3000 s Dissipation factor tan  at 20 °C 30.0 ·10-3 (1K Hz) Maximum rate of voltage rise dv/dtmax 10 V/s Climatic data Climatic category 25/100/21 to IEC 60068-1 Lower category Tmin –25 °C Upper category Tmax +100 °C Damp heat test ttest 21 days Mechanical and thermal properties Ball pressure test to IEC 60309-1 sec. 27.3 20 N at 125 °C Plastic can and top disk material Compliant to EN60252-1/ IEC60335-1  Glow wire test to IEC 60695 – 2 – 1 / 1 Test temp 550 º C for IR  0.5 A Test temp 850 º C for IR ≥ 0.5 A Self-extinguish within 30 s of withdrawing glow wire without igniting wrapping tissue  Part compliant to IEC 60335-1 Glow wire test acc. to EN60335-1:2002 +A11+A1 +A12+Corr.+A2:2006, IEC60335-1 ed 4+A1+A2 Self-extinguish within 2 s with GWT 750 ºC and within 30 s with GWFI 850 ºC of withdrawing the glow wire & without igniting the wrapping tissue Tracking test to IEC 60112 solution A >250 V Compatibility to RoHS Compliance to directive 2002/95/EC Approvals VDE – 400 V/100 °C: 10000 h (class B) Approved Compliance to LV directive 2014/35/EU Marking  Film Capacitors – AC Capacitors B32355C Motor run capacitors B32355C – MotorCap™ S3 Compact, 100 °C CAP RD FILM PD AC July 2017 Please read Cautions and warnings and Page 4 of 6 Important notes at the end of this document. Dimensional drawing: Film Capacitors – AC Capacitors B32355C Motor run capacitors B32355C – MotorCap™ S3 Compact, 100 °C CAP RD FILM PD AC July 2017 Please read Cautions and warnings and Page 5 of 6 Important notes at the end of this document. Ordering codes & Packaging units VR V AC CR µF Dimensions D × L mm Ordering code Packing units pcs 400 1.5 25 × 51 B32355C4155J019 231 2.0 25 × 51 B32355C4205J019 231 2.5 25 × 51 B32355C4255J019 231 3 25 × 60.5 B32355C4305J015 198 4 25 × 75 B32355C4405J015 To be defined 5 25 × 75 B32355C4505J015 To be defined Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes Cautions and warnings U Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are kindly requested to approve our product specifications or request our approval for your specification before ordering. Important notes Page 6 of 6 The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at .

薄膜电容器–交流电容电机运行电容器系列/类型:订购编号:日期:b32355c–motorcap™S3紧凑,100°C b32355c 2017年7月版本:1EPCOS AG 2017。复制、发布和传播本出版合同,外壳和其中包含的信息没有EPCOS的书面同意,严禁。EPCOS AG是TDK集团公司。数据表的标题栏1和2的内容将自动进入页眉和页脚!请填写表格,然后将颜色改为“白色”。这样可以确保表对客户PDF格式不可见(不可见)。在表格中输入或粘贴文本时,不要改变格式,也不要在单元格中添加任何单元格或行!识别/分类1(头1 +左栏):薄膜电容器–交流电容器识别/分类2(头2 +左下标题栏):电机运行电容器订货代码:(右上方的标题栏)b32355c系列/类型:(右下方的标题栏)b32355c–motorcap™S3紧凑,100°C初步数据(可选):部门:第三薄膜PD交流日期:2017年7月版本:1薄膜电容器–交流电容器b32355c电机运行电容器b32355c–motorcap™S3紧凑,100°C cap rd=alwayspasscap电影PD AC 2017年7月请阅读警告和注意事项6在文档的最后2页。建设金属化聚丙烯薄膜塑料与树脂上干型树脂的特点自愈性能低损耗最高安全等级的安全iec60252-1 S3类(选择性)AM1:绝缘电阻高IEC 60335-1兼容较高的工作温度,100°C.应用一般正弦波应用,主要当电机运行电容器端子绝缘实心铜线,0.5平方毫米,105°C.安装配件(可选)平原的技术数据和规格标准en60252-1:第2014-07 iec60252-1:ED 22013-8,修订1寿命IEC 60252-1 / 2013 400 V:10000 h(B类)IEC 60252-1 / 2013 S3额定电容Cr看到安全类表序码,5页5%允许公差电容C / C3%额定电压VR 400伏交流额定频率fr 50 / 60 Hz最大额定值的最大允许电压Vmax 1.1·虚拟现实(VR =额定电压)最大允许电流Imax 1.3红外(IR =额定电流)薄膜电容器–交流电容器b32355c电机运行电容器b32355c–motorcap™S3紧凑,100°C cap rd=alwayspasscap电影PD AC 2017年7月请阅读警告和注意事项6在文档的最后3页。测试数据交流试验电压终端到终端的UTT交流试验电压端子可以UTC 2 VR,2(常规)2 kV交流,2(常规)绝缘电阻环或时间在20°C恒,REL。湿度最大值为85%,年平均在20°C30·10-365% 3000的介质损耗角正切(1K Hz)最大电压上升速率的DV / 10 V /气候数据气候类别25/100 / 21 IEC 60068-1低级别25°Tmin–C上限类别Tmax + 100°C潮湿热试验检测21天的机械和热性能,球压试验IEC 60309-1秒率。27.3 20 N 125°C塑料可以和顶部盘材料符合IEC60335 en60252-1 /灼热丝测试IEC 60695–2–1/1试验温度550 Cº红外0.5测试温度850 Cº红外≥0.5自熄30 s内撤回灼热丝点燃包皮组织部分无符合IEC 60335-1灼热丝测试根据en60335-1:2002 +都+ A1 + 12 +相关+ a2:2006,IEC60335 ED 4 + A1 + A2自能在2秒之内的GWT 750ºC和30 s内有易燃指数850ºC退出辉光电线没有点燃包皮组织跟踪测试IEC 60112标准溶液一> 250 V兼容RoHS指令2002/95 / EC认证VDE–400 V / 100°C 10000 H(B类)批准符合吕彦直我2014 / 35 /欧盟标志的薄膜电容器–交流电容器b32355c电机运行电容器b32355c–motorcap™S3紧凑,100°C cap rd=alwayspasscap电影PD AC 2017年7月请阅读警告和注意事项6在文档的最后4页。尺寸图:薄膜电容器–交流电容器b32355c电机运行电容器b32355c–motorcap™S3紧凑,100°C cap rd=alwayspasscap电影PD AC 2017年7月请阅读警告和注意事项6在文档的最后5页。序码与包装单元VR V AC CRµF尺寸D×l mm订购代码包装单位电脑400 1.5 25 51 231 2 25×b32355c4155j019×51 b32355c4205j019 231 2.5 25 51 231 3 25×b32355c4255j019×60.5 198 4 25 75 b32355c4305j015×b32355c4405j015被定义5 25×75 b32355c4505j015要定义的排序码爱普科斯产品订购代码同一爱普科斯产品展示可以表示数据表中的数据,不同的书籍,其他的出版物,在EPCOS网站,或为相关文件。

返回列表

上一篇:暫無數據

下一篇:暫無數據

  • 精選品牌
    • Samsung
    • ADI
    • Murata
    • Amphenol
    • Roving
    • Walsin
    • Panasonic
    • TE
    • United-Chemi-Con
    • Molex
    • Nichicon
    • Microchip
    • Bourns
    • ROHM
    • AVX
    • Catalyst
    • ST
    • NXP
    • Vishay
    • KEMET
    • TDK
    • FTDI
    • HARTING
    • Mean Well
    • BroadcomLimited
    • Eaton
    • Microsemi
    • Atmel
    • JST
    • Agilent